美國UVP B-100SP高強度紫外線探傷燈功率為90W，長波365nm
B-100SP高強度探傷燈的應用領域：滲透檢測、熒光探傷；生物聚合、熒光觀察；空調制冷劑泄漏檢測；發動機潤滑油泄漏檢測；油污清洗檢測。
B-100SP高強度紫外燈為90W長波紫外線燈，高強度抗沖擊外殼由有Cool-Touch阻熱材料制造，可長時間工作不產生高溫，其設計可以應用在汽車行業中，用來檢測設計漏洞，在線路搭乘制造，礦物學研究等也有應用。

主要特點
• 功率為90W，長波365nm
• 在25cm處紫外線強度為1800uW/cm2
• 燈泡的壽命約為1000小時
• 燈頭與鎮流器一體，zui輕便的交流供電
• 具有Cool-Touch阻熱材料外殼，電源線為2.44m

B-100系列燈有多種型號選擇
所有“P”系列燈都具有Cool-Touch阻熱材料外殼，沒有高溫產生，無論使用多長時間燈頭溫度可以手持，可以面朝下放置在工作臺也不會損壞。非“P”系列的是鋁合金外殼。

B-100SP
140W長波，自鎮流燈手持高度便攜，高強度燈泡，汽車泄漏檢測的高強度探傷燈。鎮流器直接內置到燈頭里。B-100SP具有Cool-Touch阻熱外殼，不易產生高溫。2.44m電源線。
B-100SP是zui輕便的90瓦高強度長波紫外燈，采用交流供電的紫外燈。*的應用在汽車的泄漏檢測。強度的紫外線，即使在白天室外，也能夠很輕易的發現微小的泄漏。
自鎮流燈泡使用的壽命長，燈頭和鎮流器與一體，采用Cool-Touch耐熱材料，人體工程學設計，重量輕，減少操作疲勞。一個操作開關位于輔助手柄。重量1.43kg。

型號

美國UVP B-100SP高強度紫外線探傷燈功率為90W的英文介紹：

Main Features
The B-100 Series lamps are available in a variety of styles: All "P" series lamps come with the special heat-resistant plastic Cool-TouchTM housing which allows users to handle the lamp head regardless of how long the lamp has been operating. These rugged lamps can be placed face down on a working surface without damage to the filter. The non "P" models are built with an aluminum lamp head.
A 100 watt spot bulb is standard with all models (except the B-100SP); the bulb is rated at 5000 hours.
Self-ballasted bulb included with the B-100SP has an average life of 450 to 2000 hours depending on use patterns
The lamp head connects to the transformer base for hands free use (all models except B-100SP) allowing the lamp head to rotate a full 360°; remove the lamp from the base for additional mobility
B-100AP and B-100AP/R
B-100AP models feature 100 watt longwave UV, Cool-Touch housing and ballast base. At 18 in. (457 mm), the lamp produces a highly intense center of UV irradiance about 5 in. (127 mm) in diameter. Lamp head can rotate 360 degrees when attached to the base for hands-free operation or lamp can be removed from the base. 8 ft primary and secondary cords. For added mobility, select the B-100AP/R which includes 20 ft (6.1m) primary and secondary cords. Uses for these lamps include non-destructive testing and fluorescence inspection.
 
B-100A and A-100AR
The longwave B-100A is manufactured with a scratch-resistant aluminum housing which connects to ballast base with an 8 foot cord; 8 foot secondary cord is included. The 100 watt longwave UV bulb is excellent for inspection applications. For increased mobility, select the B-100AR which includes 20 ft (6.1m) primary and secondary cords. Uses for these lamps include non-destructive testing and fluorescence inspection.
 

This 90 watt longwave, self-ballasted lamp is a highly portable, high intensity lamp for automotive leak detection applications. The ballast is built directly into the bulb. The B-100SP features the Cool-Touch housing and an 8 ft. (2.44m) cord.
 
B-100Y and B-100YP
These models feature a yellow filter which blocks wavelengths shorter than 500nm and produces three strong mercury lines at 543, 574 and 576nm. The high contrast light is produced for fine surface particle detection. Particles down to 10 microns are routinely visible with this lamp. B-100Y is built with the aluminum housing; B-100YP with a plastic housing. These lamps are excellent for semiconductor wafer inspection as most photoresist absorption occurs below 450nm.

B-100SP:
Lamp Head 9.75D x 6Dia. in. (248 x 152mm) 
Weight: 3.14lb. (1.43kg) 
Cord length: 8 ft. (2.44m)

Applications
Fluorescence Inspections
Non Destructive Testing
Leak Detection
Readmission
UV Applications Notes
UV Application List

Options
Finger Guard:
Prevents fingers from touching the bulb
Finger Guard for B-100AP, B-100AP/R - 89-0068-01
Lamp Funnel:
Directs the UV source to a specific location
Lamp Funnel for B-100AP, B-100AP/R, B-100SP - 19-0126-01
Lamp Visor:
Shields the user from the blue haze emitted from the lamp
Lamp Visor for B-100AP, B-100AP/R, B-100SP - 19-0125-01
Lamp Visor for B-100A, B-100AR - 19-0124-01
Exposure Box:
Exposure Box for B-100AP, B-100AP/R, B-100YP, B-100SP 
Part number: 76-0055-01
UV Blocking Eyewear
Reveal Leak Detection Additives